guest
New Member
Posts: 0
|
Post by guest on Jan 17, 2005 12:49:21 GMT -5
what are the best head gaskets for a chevy big block with nitrous.
|
|
bxl007
Full Member
"BELEIVE THE HYPE"
Posts: 185
|
Post by bxl007 on Jan 17, 2005 14:12:26 GMT -5
I use copper but this year we are switching to corteco white seal gasket.
|
|
|
Post by steve keen on Jan 17, 2005 21:19:53 GMT -5
big nitrous? .042 copper {clark or sce} .052 stainless O ring W reciever groove.the O ring should be .012 out of the deck. {some like the O ring in the head some like it in the block}. I think that part is personel preferance. used this setup w 600 HP in nos and never had head gasket failure. onother BIG key when useing the copper gasket is make SURE the gasket bore opening is bigger than the cylinder bore. if is not it WILL detonate on the gasket. most gaskets are a smidge bigger. but I have seen some that aren"t. hope this helps you, steve
|
|