|
Post by michael brewer on Feb 7, 2007 18:14:06 GMT -5
about done with rollcage, interior about to go back in, i've been told some ways to install the shoulder straps, but could use some more advice, what most racers do? it's a unibody mustang with just frame connectors, thanks, good luck pierre, that may be a fun class.
|
|
Daryl
Full Member
Posts: 244
|
Post by Daryl on Feb 7, 2007 21:05:29 GMT -5
Hey Michael we used a piece of 3/8" metal and welded it to the bar behind the seat. Dave threaded it and we also put a lock nut on it also. Later Daryl
|
|
|
Post by michael brewer on Feb 19, 2007 11:13:46 GMT -5
thanks, daryl, i used the v-type pullover belts, plenty of length with the stock seat, and i'm not that tall, also i learned racecars should not have interior, what a job working around the roll bar. and cutting carpet, looks good though. see ya
|
|